Error message is displayed, Index contents – Canon W8400 User Manual
Page 368
6- 21
When You Cannot Print
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Solution 3: For Mac OS X:
1. Open the Printer Setup Utility.
2. From the Printers menu select Start Job to
release the print pause.
Cause 3:
With Mac OS 8/9, the printer is shared via USB.
Solution 1: Connect the printer directly to the computer to
be used for printing through its USB or
IEEE1394 port. If you want to share the printer,
do the print job from a Windows computer.
Error message is displayed.
Cause1
Media has jammed in the printer.
Solution1 Remove the jammed sheet. (
)
Cause 2:
Printer is offline.
Solution 1: After correcting the problem in response to the
error message, press the Online button to set
the printer online.
Solution 2: If the operation panel display reads Offline,
press the Online button to set the printer
online.
Cause 3:
An error message is displayed during printing.
Solution 1: When an error message appears in the printer
operation panel or the Windows display, read
the message in the GARO Status Monitor, or in
the GARO Printmonitor for Macintosh. Then
correct the problem. (
→
)
Cause 4:
No print media loaded.
Solution 1: Replenish the print media in the specified
media supply source.
ERROR E02E01
Turn Power Off!!