Canon W8400 - Manual (Page 372)

6- 25
‹ When You Cannot Print
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Cause 4: The computer and printer are not on the same
network.
Solution 1: If the number of routers are exceeded with the
Zeroconf function, the computer cannot
connect to the printer if it is on a different
network. Connect the computer and printer to
the same network. For more about the network
settings, please contact the network manager.
Cause 5: The settings for the computer used for printing
are not set correctly.
Solution 1: For Mac OS 8.6/9.x
1. Open Chooser from the Apple menu.
2. Under AppleTalk make sure that Active is
selected.
3. Under AppleTalk in the Control Panel of
the Apple menu, make sure that the printer
is selected for connection to the correct port
for the Connective Via.
4. In the Chooser make sure that the GARO
Printer Driver is installed.
5. In the Chooser, select GARO Printer
Driver, and under Connective Via select
AppleTalk, then select again the name of
this printer in the printer list.
Solution 2: For Mac OS X:
1. Open Network for the System
Preferences.
2. Under Show, select the name of the LAN
port where the printer is connected.