Switching off ink level detection, P.4-8, Switching off ink level detection -8 – Canon W8400 User Manual
Page 253: Index contents
4- 8
Cautions About Using Refilled Ink Tanks for This Printer
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Cautions About Using Refilled Ink Tanks for This Printer
The ink tanks designed for this printer have an ink level
detection function to prevent damage to the printhead when
the ink runs our during printing.
If you use a refilled ink tank, the ink level detection function
will no longer function correctly. The printer will detect ink
out and print operation will halt. Before you can use tanks
like this, you must switch off the ink level detection function.
If you print with the ink level detection switched off, the
printer (especially the printhead) may be damaged or other
problems may arise. Canon, Inc. will assume no
responsibility for damages caused by using ink tanks not
designed for use with the printer.
Caution
z
Once the ink level detection function has been
switched off, the ink level detection function cannot be
restored for the ink tanks in the printer. To restore the
ink level display, the ink tanks must be replaced with
new ink tanks designed for use with the printer.
z
If the same ink tank is repeatedly removed and
reinserted, this could damage the connection points
between the ink tank and the printer, leading to ink
leakage which could damage the printer.
Switching Off Ink Level Detection
1
Press the Online button to display MAIN
MENU.
2
Press the [
] or [
] button to select
System Setup then press [
].
3
Press [
] or [
] to select Stop Ink Check,
then press [
].
4
Press [
] or [
] to select Bk Ink Tank,
then press the OK button.
Note
z
Press the Online button to cancel these procedures.
5
When Stop Function? appears press [
]
or [
] to select Yes, then press OK button.
An equals sign (=) appears as a prefix to the setting
and the remaining ink detection function of the
selected ink tank is switched off.