Index contents – Canon W8400 User Manual
Page 98
2- 37
Printing with Rolls Media
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Heavyweight Glossy Photo Paper, Heavyweight
Semi-Glossy Photo Paper, Backlight Film, CAD
Translucent Matte Film
The printer will stop after printing has ended to
protect the printed surface. To prevent the printed
matter falling into the output stacker, support the
printed matter by hand and press the Stop/Eject
button, and then perform cutting.
Important
z
If the ink drying time has been set, cutting cannot be
performed by pressing the Stop/Eject button until the
ink drying time has elapsed.
3
Open the top cover, and left the ejection
guide.
4
Rotate the top of the roll holder toward the
back to spool and remove the roll media.
5
Close the ejection guide, and then close the
top cover.