Cannot print from the netware network, Index contents – Canon W8400 User Manual
Page 373
6- 26
When You Cannot Print
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
3. Open the AppleTalk panel and make sure
that Make AppleTalk Active is selected with
a checkmark.
4. Open Printer Setup Utility and make sure
that the name of this printer is displayed in
the printer list. If the name is not displayed,
click the Add button to add the name of the
printer.
5. If the name of the printer does not display
after clicking the Add button, use the
provided User Software CD-ROM to reinstall
the printer driver for the printer.
Cannot print from the NetWare network.
Cause 1:
The printer LAN port and cable are not
connected correctly.
Solution 1: Confirm that the connection of the cable that
connects the printer to the network is secure,
then press the Power button to cycle the printer
off and on again. (
→
)
Cause 2:
The printer cannot recognize automatically the
LAN communication method.
Solution 1: Use the printer operation panel to select
Interface Setup
→Ethernet Driver then set
each item for the communication method that is
being used on the LAN. (
→
Cause 3:
The NetWare network is not set correctly.
Solution 1: Check the following points:
1. Make sure that the NetWare file server is
running.
2. Is there enough disk space available on the
NetWare file server? You may not be able to
do large print jobs if there is not enough free
space available.
3. Start NWADMIN or PCONSOLE and confirm
(1) that the print service is set correctly, and
(2) that the print queue has been enabled for
use. (
→
)
4. Make sure that the printer network settings
are correct. Especially, confirm that a frame
type is enabled for the Frame Type setting.
(
)