Canon W8400 - Manual (Page 395)

7- 2
‹ Checking the Printer Function Menu
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Checking the Printer Function Menu
This chapter explains the operation method and the example of the message of the printer display about the function often
used on the printer menu according to the purpose. The message for the required operations and displayed on the printer
display is shown in figure.
MAIN MENU
System Setup
Change Cutter
Online
Offline
Online
Yes No
Reset Cut Count
Resetting
Online
Online
OK
OK
OK
Opening the Top Cover and Replacing the Cutter
Closing the Top Cover
Open UpperCover
Online
Stop/Eject
a
b
c
d
a
e
f
g
h
This describes the operation that pushes an
Online button once. If you press the Online
button while operating the menu, the
proceeding operation, which is not set due to
not pressing the OK button, will be canceled
and returned to Online mode (or Offline for
loading the media).
This described the operation that selects the
menu with pressing [
] or [ ] button.
This described the advanced operation to the
following menu with pressing [
] button once.
If you want to return to the main menu, you
can use [
] button.
This described the operation that executes
displayed set value/item with pressing OK
button.
This describes the operation that cancels
execution with pressing Stop/Eject button.
This described setting value of the menu item.
This describes the indicated message which is
shown through the operation.
This described the procedure that should be
done excluding the menu operation not using
operation panel.
Online
Stop/Eject