Canon W8400 - Manual (Page 53)

1- 50
‹ Options
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Options
The following options are provided for this printer.
„ Media Take-up Unit
Printed media can be automatically spooled when you
are using roll media. This is convenient for printing long
prints or performing continuous printing.
z
Media Take-up Unit TU-04
Note
z Refer to the “Media Take-up Unit Setup Guide” binding
to the Media Take-up Unit for the installation.
z Refer to the “Using the Media Take-up Unit” ( → P.2-46 )
for the Media Take-up Unit usage.
„ Cutter Unit
This is a high-performance cutter blade with long service
life that can cut more types of media than the flat blade,
which is mounted as standard.
z
Cutter Unit CU-04
Note
z Refer to “Replacing Optional Cutter Blades (Round
Cutters)” ( → P.4-30 ) or the “Round Blade Cutter Unit
Setup Guide” binding to the Cutter Unit for the
installation.
z Refer to the “Media Type” ( → P.2-4 ) for the available
paper type with the Cutter Unit.