Canon W8400 - Manual (Page 339)

5- 43
‹ NetWare Settings (Windows)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
z NDS PServer Selected:Queue Server Mode
(Using an NDS Print Server)
Enter the Tree Name and Context Name for
the tree and context name of the print server.
Enter a context name of up to 255 characters.
For Print Server Name, enter the name of the
print server created in
“Setting Up a NetWare
Print Service” . ( → P.5-37 )
For Print Server Password, enter the print
server password created in
“Setting Up a
NetWare Print Service” . ( → P.5-37 )
Set the Polling Interval. Set the interval at
which to check the printer NetWare print
queue.
z NPrinter Selected: Remote Printer Mode (using an
NDS Print Server)
For Print Server Name, enter the advertised
name of the print server created in
“Setting Up
a NetWare Print Service” ( → P.5-37 ). The
advertised name is set to the same name as
the normal printer server name.
For Printer Number, enter the same printer
number that you entered in
“Setting Up a
NetWare Print Service” . ( → P.5-37 )
10
Click the OK button.
11
When you return to Network under Device
Manager, press the Reset button.
The printer network interface restarts and the
settings are enabled.
This completes the NetWare protocol settings.