Canon W8400 - Manual (Page 337)

5- 41
‹ NetWare Settings (Windows)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
3
Select Network from the Device Manager
menu on the left.
The Network page appears.
4
Click the Edit button to the right of NetWare.
The Edit NetWare Protocol Settings page
appears.
5
Check the Frame Type box and make sure
the setting is correct for your NetWare
network.
6
If you intend to use burst mode, set NCP
Burst Mode to On.
Note
z Burst mode is used in queue server mode to transfer
data rapidly at very high speed during printing.
z Normally, leave this setting on.