Index contents – Canon W8400 User Manual
Page 251
4- 6
Replacing Ink Tanks
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
3
Press the ink tank lever of the color to
replace, then open the ink tank cover.
4
Hold the empty ink tank by the grips on the left
and right side of the ink tank, then remove it.
Place the ink tank that you removed in a plastic bag
and seal it.
Important
z
If there is ink remaining in the removed ink tank, store
the ink tank with the ink supply port (a) pointing up. If
you store the tank with the ink supply port (a) facing
down, ink may leak out.
5
Gently shake the new ink tank 7 or 8 times
while it is still in the package, then remove it
from the package.
Important
z
Always confirm that the replacement black ink tank is
the same type as the tank that is installed in the printer.
If you mix up the photo black ink tank and matte black
ink tank, print quality will be reduced. To change the
type of ink tank, execute ChangeBkInkType on the
printer operation panel before replacing the ink tank.
(
z
Always hold an ink tank by its left and right grips (b)
while you are handling it.
z
Never touch the ink supply port (a) or the electrical
contacts (c). This could damage the ink tank, cause
poor print quality, or stain the work area.
a
b
a
c