If set to On, a bar code is printed when the roll
is removed in order to keep track of the amount
of media remaining on each roll.
If set to Off, a bar code is not printed when the
roll is removed. If this is set to Off, the edge will
be cut off regardless of the roll paper loading
position.

Roll Length Set

## m (if meter is selected using Length
Unit), ## feet (if feet/inch is selected
using Length Unit), Manual Setting,
Unknown

The sets the length of the roll media when the Chk
Remain.Roll function is On and roll media with no
bar code has been loaded. This is displayed only
when Chk Remain.Roll function is On.
Setting values are displayed in meters or feet
depending on the values of the Length Unit setting.
You can choose the Manual Setting to directly enter
the length.
If this setting is set to Unknown, the Chk Remain.
Roll function is switched Off.

Nozzle Check

Off, 1 Page, 10 Pages*

Allows you to set the number of pages to print
when a nozzle clogs during an automatic check.

Stop Ink Check

Bk Ink Tank
PC Ink Tank
C Ink Tank
PM Ink Tank
M Ink Tank
Y Ink Tank

Switches off the ink level detection function.
(

→

P.4-8

)

Sleep Timer

5 min., 10 min., 15 min*., 20 min., 30
min., 40 min., 50 min., 60 min.

Sets the amount of time the printer remains idle
before it enters sleep mode.

*Use Power Save

On, Off

Set the printer sleep function. If the sleep function
is turned ON, the printer will enter sleep mode
when the time set using Sleep Timer has elapsed
if the covers are closed, print data has been
received, or the printer controls are not being
operated, to conserve power consumption. If set
to OFF, sleep mode is disabled. (

→

P.1-9

)

Menu Item

Setting Values

Function

Advertising