P.2-36, Index contents – Canon W8400 User Manual
Page 97
2- 36
Printing with Rolls Media
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Paper Types for which the Standard Cutter Has
Been Turned Enable
1. The remaining amount barcode will be printed
at the leading edge of the media, if the roll
media remaining detection function is ON.
2. Roll media is ejected from the back.
Important
z
When the release lever is opened, the remaining
amount barcode will not be printed without pushing the
Stop/Eject button even if the roll media remaining
detection function is ON. In this case, the printer will
not be able to keep track of the amount of media
remaining.
Paper Types that Cannot be Cut Automatically
1. Press the Online button. The printer will
become offline.
2. Press the [
] button (not longer than 0.8 sec)
to feed the media 330 mm.
3. Cut along the guideline using a pair of scissors.
4. Press and hold the [
] button on the operation
panel for more than 1 sec. until you see Feed
Limit... The roll media will spool 300 mm, and
stop automatically.
5. Press the Online button. The printer will
become online.
Important
z
If the printer receives new print data before performing
this operation, printing will continue.
z
Cut accurately along the guideline. If the cutting
position is misaligned by 30 mm or greater from the
guideline, subsequent printing may not be performed
accurately.
P l a i n P a p e r
X X