If set to 5 mm, the print quality at the trailing
edge, or the accuracy of feeding, may
deteriorate, or the surface of the print may be
scratched. Ink may also adhere to the trailing
edge of the media.

Media Thickness

Thick, Standard, Thin

Selects the ideal thickness for the media type.
The printhead alert will display based on the
value of this setting.

VacuumStrngth

Weak, Standard, Strong, Strongest

Sets the amount of suction on the media on the
platen.

Standard Cutter

Enable, Disable

Determines whether the standard, flat blade
cutter is enabled.

Cut speed

Standard, Fast

Sets the speed of the cutter cutting the media.
For media such as film that has a tendency to
produce debris, select Fast to reduce the
amount of debris produced. This item is
enabled for the standard cutter only.

CutDustReduct.

Off*, On

A line is printed at the cut line in order to reduce
the amount of dust generated by film and other
media during cutting.

Correct Smear

Off*, On

Use this setting to correct the printing problems
if the media appears to smear easily.

Menu Item

Setting Values

Function

Advertising