P.5-35, Index top contents – Canon W8400 User Manual
Page 331
5- 35
NetWare Settings (Windows)
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
3
Set NetWare Frame Type to the frame type
you are using, set TCP/IP Frame Type to
ETHERNET II, enter the IP Address
assigned to the printer, the Subnet Mask and
Gateway Address, then click the Set button.
Note
z
The IP address needs to be configured here so that
you can configure the printer protocol settings using a
web browser (Remote UI).
4
Click the OK button when the confirmation
message is displayed.
5
When you have finished configuring the
settings, select Exit from the Printer menu.
Configuring the Printer Using the Printer
Operation Panel
The NetWare network information can be configured
using the printer operation panel.
1
Press the Online button to display MAIN
MENU.
2
Press [
] or [
] to select Interface Setup
then press [
].
3
Press [
] or [
] to select NetWare, then
press [
].
MAIN MENU
Interface Setup
Interface Setup
NetWare
↓
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)