Canon W8400 - Manual (Page 317)

5- 21
‹ Macintosh Network Settings
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
z If you are using Mac OS X v10.1, the printer can be
used over the “Canon IP (GARO)” network. Canon IP
(GARO) uses the TCP/IP protocol. If the TCP/IP
settings have been enabled on the Macintosh
computer and printer, save the printer IP address to
make the printer available.
z If you are using Mac OS X v10.2.5 or later, the
Zeroconf function can be used. The Zeroconf function
uses the TCP/IP protocol. If the TCP/IP settings have
been enabled on the Macintosh computer, the printer
can be used simply by connecting it to the LAN.
“Zeroconf” is an abbreviation for “Zero Configuration”,
and settings such as IP address and DNS service
name are not required.
Configuring a Macintosh
„ Setting the AppleTalk Network Functions
z For Mac OS 8.6/9.x
Use Chooser and the AppleTalk item in Control Panel
to confirm the Macintosh network settings.
1
Confirm that AppleTalk can be used.
From the Apple menu select Chooser.
Confirm that Active is selected for AppleTalk.
If Inactive is selected, select Active.