Compuprint 4247-X03 - Manual (Page 113)

9. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
SMTP Service
SMTP (Simple Mail Transfer Protocol) allows a mail server address to be entered
into the printer configuration to send automated e-mail notifications with printer
alert conditions.
You can set the SMTP Service to:
Disabled (Default) Disables the SMTP (Simple Mail Transfer Protocol) service (disables
the reception/transfer/error service of the e-mail).
Enabled Enables the SMTP service (enables the reception/transfer/error service
of the e-mail).
To change or check the SMTP Service:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
LAN Interface
5. Press ENTER and the printer displays
LAN Interface
SMTP Service
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
SMTP Service is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Mail Server Address
You can set the Mail Server Address:
Example: 000.000.000.000 (Default)
These values set the Mail Server Address. This number is represented by a decimal
notation. The decimal values are divided into four fields by periods. Each field's
values can range from 0 to 255.
Note: You can only select Mail Server Address if the “SMTP Service” function
choice is Enabled.
To change or check the Mail Server Address:
Chapter 7. ASCII Configuration 97