Compuprint 4247-X03 - Manual (Page 57)

Configuration storage
Table 1 lists the parameters available for the Configuration Storage Category. Refer
to Chapter 4, “Configuration storage” for detailed information on setting these
parameters.
Table 1. Configuration Storage Category
Parameters Values Default
Save Current Values Custom Set A-H N/A
Recall Custom Set Custom Set A-H N/A
Power-On Custom Set Last Used
Custom Set A-H Last Used
Power-On Paper Source Front
Rear
Last Used Front
Recall Factory Defaults Yes N/A
Note: Use Recall Factory Defaults to set all the parameters to the manufacturing default
values. See “Recall factory defaults” on page 53.
Attachment
Table 2 lists the parameters available for the Attachment Category. Refer to
Chapter 5, “Attachment options,” on page 55 for detailed information on setting
these parameters
Table 2. Attachment Category
Parameters Values Default
Attachment Hot Port Switch, Parallel,
Serial, USB, LAN ASCII,
LAN IPDS Hot Port Switch
IPDS Configuration
Table 3 lists the parameters available for the IPDS Configuration Category.
Parameters that can be overridden by the computer are noted with a dagger (†).
Refer to Chapter 6, “IPDS Configuration,” on page 57 for detailed information on
setting these parameters
Table 3. IPDS Configuration Category
Parameters Values Default
† Characters Per Inch 10
12
15
16.7 10
† Lines Per Inch 6
8 6
† Maximum Print Position 001 to 227 132
† Maximum Page Length 001 to 880 066
† Print Quality DP Quality
DP Text Quality
Near Letter Quality DP Quality
Chapter 3. Checking and changing configuration parameter values 41