Compuprint 4247-X03 - Manual (Page 52)

NOT READY <X>
(or cause the current test menu to display if the printer is in Operator Print Tests
mode)
If an error condition appears on the operator panel display, press STOP to:
v
Clear the error message from the display
v Stop the printer alarm from beeping.
CANCEL PRINT
When this key is pressed while the printer is active and online, the attachment
sends a “cancel request” to the host the printer displays:
059 CANCEL PRINT ACTIVE
For any attachment option, the CANCEL PRINT button clears all print data and
buffers. This function is valid only when the printer is not ready.
CANCEL PRINT is also active in Operator Print Tests. If CANCEL PRINT is
pressed while in the tests, the printer stops any test in process, exits the test mode,
performs a partial reset, and becomes ready.
TEST
Press TEST to enter the Operator Print Tests menu. The Test function is valid only
when the printer is not ready.
There are several tests available. After you press TEST, the printer displays:
OPERATOR PRINT TESTS
Quick Reference
Press SCROLL/MICRO or SCROLL/MICRO to display the other available tests.
Refer to Chapter 17, “Using the Operator Print Tests,” on page 139 on selecting and
running tests.
36 User’s Guide