E-mail address (receiver) – Compuprint 4247-X03 User Manual
Page 114
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
LAN Interface
5.
Press ENTER and the printer displays
LAN Interface
Mail Server Address
6.
Press ENTER to display the current value.
7.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Mail
Server Address is displayed.
8.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9.
Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
E-Mail Address (Receiver)
You can set the E-Mail Address (Receiver) to:
v
48 Chars
(max)
v
Null String
(Default)
This function allows you to enter the e-mail address (up to 48 characters in length)
of the person you want to notify of printer failures.
Note:
You can only select E-Mail Address (Receiver) if the “SMTP Service”
function is Enabled.
To change or check the E-Mail Address (Receiver):
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
LAN Interface
5.
Press ENTER and the printer displays
LAN Interface
E-Mail Address (Receiver)
6.
Press ENTER to display the current value.
98
User’s Guide