Compuprint 4247-X03 - Manual (Page 162)

3. Some multiple-part forms (such as mailers, thick/heavy perforations) may
cause problems when using the Park function. Try the forms first. To minimize
parking problems, discuss your needs with your forms supplier when selecting
forms.
4. We do not recommend continuous forms with adhesive labels.
5. To prevent the separation of labels from continuous-forms when using the
EJECT
or PARK keys, set FRONT FORMS BACKUP=DISABLED or REAR
FORMS BACKUP=DISABLED in the Power On Configuration menu. Making
this configuration change does the following:
v
Disables the EJECT key tear-off function
v Modifies how the PARK key works for forms in the Front Push and Rear
Push forms paths. You cannot back up the forms to park them. Break the
forms at a perforation before they enter the printer. Press PARK twice, and
the forms will move forward until ejected from the printer.
6. Black-back forms cannot be used in the default tractor. They can only be used
in the optional second tractor.
Proper forms loading
The paper must be loaded as shown in Figure 35.
Note: The input forms must always be lower than the printer.
We offer an optional printer stand for your 4247 Printer. For more information on
this printer stand, contact your marketing representative.
Note: For optimum performance, We recommend using the Front Push forms path.
Figure 35. Correctly Loaded Paper
146 User’s Guide