Preface, How to use this guide – Compuprint 4247-X03 User Manual
Page 15
Preface
This guide describes the basic operating procedures for the 4247 Model X03
printer. This information is useful to those who install or operate the printer, or for
those who supervise printer operations.
You need only basic operating experience to use this printer. This experience
includes an understanding of how printers work, how to connect cables, and how
to select items from an operator panel menu.
How to use this guide
The following list describes the contents of each chapter and the appendixes in this
book.
v
Chapter 1, “Getting started,” provides information on setting up the printer and
connecting it to the host computer.
v
Chapter 2, “Understanding the operator panel,” describes the operator panel and
how to use it.
v
Chapter 3, “Checking and changing configuration parameter values,” describes
the configuration parameters and values and gives you a brief description and
procedure for changing them.
v
Chapter 4, “Configuration storage,” provides information on saving
configuration parameters into a custom set for your printer. The configuration
storage category has eight available custom sets.
v
Chapter 5, “Attachment options,” provides the procedure for setting the
configuration for printer attachment.
v
Chapter 6, “IPDS Configuration,” describes how to check and change IPDS
™
configuration parameters for your 4247 printer.
v
Chapter 7, “ASCII Configuration,” describes the procedures for checking and
changing parameter values for parallel and serial attachments.
v
Chapter 8, “Printer setup,” describes the procedures for checking and changing
the parameter values in the configuration menu for the printer setup category.
v
Chapter 9, “Printer adjustments,” describes the parameters for checking and
changing the parameter values in the configuration menu for the printer
adjustment category.
v
Chapter 10, “Power-On Reset (POR),” describes the procedure to perform a
power-on reset for your printer.
v
Chapter 11, “Display Language,” provides information on the display languages
shipped with your printer.
v
Chapter 12, “Vital Product Data,” provides information to check and change
some of the vital product data for the printer.
v
Chapter 13, “Quiet Print,” describes the procedure to set the Quiet Print mode
for your printer.
v
Chapter 14, “Hex Print,” describes the procedure to set the Hex Print mode for
your printer.
v
Chapter 15, “Quit From Menu,” describes the procedure to quit from the
configuration menu and restore the previous configuration menu values.
v
Chapter 16, “Dual push tractor forms paths,” describes forms and paper loading,
and running a print job through the six different paper paths.
xv