Recall factory defaults – Compuprint 4247-X03 User Manual
Page 69
Configuration Storage
Power-On Paper Source
5.
Press ENTER to display the current value.
6.
Press SCROLL/MICRO or SCROLL/MICRO until the desired Power-on
Paper Source value is displayed.
7.
Press ENTER.
An asterisk (*) will be displayed in front of the selected paper source.
8.
Use START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Recall factory defaults
This function sets all parameter values to the original manufacturing default
values, except Vital Product Data and Printer Address (Twinax attachment). These
settings can only be changed through their own menu selection.
The printer is shipped with all of the custom sets set to manufacturing default
values and custom set A as the power-on custom set. The Recall Factory Defaults
function does not affect the values saved in custom sets.
Note:
When factory defaults are recalled, a partial reset is automatically performed
when exiting from the configuration menu if the value of at least one of the
parameters that requires a partial reset has been changed. Buffered data will
be lost.
To recall the factory defaults, follow these steps:
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Configuration Storage
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Configuration Storage
Recall Factory Defaults
5.
Press ENTER.
The printer displays
Recall Factory Defaults
Yes
6.
Press ENTER.
The printer displays
Recall Factory Defaults
Factory Defaults Recalled
7.
Use START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Chapter 4. Configuration storage
53