Operating and service clearance, Weight, Power consumption – Compuprint 4247-X03 User Manual
Page 182: Heat output, Printer clearances
Operating and service clearance
You should provide adequate space for cooling air, and for operating or
maintaining the printer. This is also helpful if you will occasionally change the
Controller Board. Often, as little as 450 mm (18 in.) of extra table space (or floor
space, for a printer on the optional printer stand) is adequate to service a printer.
Weight
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
Power consumption
Category
115 Vac
60 Hz
230 Vac
50 Hz
Maximum (Peak)
220 Watts
210 Watts
Operating (Maximum Typical)
155 Watts
145 Watts
Power Saver Mode*
19.2 Watts
20.2 Watts
Idle (Off Mode)
0.1 Watts
0.1 Watts
*Power Saver timeout is 23 seconds.
Heat output
Category
115 Vac
60 Hz
230 Vac
50 Hz
Operating (Maximum Typical)
147 Watts (500 BTU/hr)
138 Watts (470 BTU/hr)
Idle
23 Watts (75 BTU/hr)
23 Watts (75 BTU/hr)
Figure 43. Printer clearances.
166
User’s Guide