Compuprint 4247-X03 - Manual (Page 25)

Installing the ribbon cartridge
It is recommended that you use an approved ribbon cartridge. To install the ribbon
cartridge, follow these steps:
1. Remove the ribbon cartridge from the package. Locate the ribbon guide, snap
arm, ribbon advance knob, and the ribbon mounting pins.
To avoid damage to the ribbon, do not turn the winding knob in the wrong direction.
2. Turn the ribbon advance knob in the direction of the arrow to take up any
slack in the ribbon. If the ribbon does not move, contact your place of ribbon
purchase to replace the ribbon cartridge.
Figure 9. Ribbon Cartridge
Chapter 1. Getting started 9