Compuprint 4247-X03 - Manual (Page 118)

Front Forms Backup
This setting applies to the paper loaded on the default tractor, if the second
(optional) tractor is not installed. When the second optional tractor is installed, this
setting applies to the paper loaded with this tractor. The Front Forms Backup
parameter instructs the printer whether it can perform tractor movements that
would back the forms up. Such movements include parking the printer. This
would be used when the physical characteristics of the forms currently loaded
make it undesirable for the printer to attempt to move the forms in the reverse
direction (for example, labels).
Even if Front Forms Backup is disabled, the SCROLL/MICRO can still be used
for the paper path. You can define the front forms backup to either one of the
following values:
Enabled (Default)
Allows the printer to back up the front forms as
needed.
Disabled Prevents the printer from backing up front forms.
Use this setting for labeled continuous forms.
To change or check the Front Forms Backup:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Setup
Front Forms Backup
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Front Forms Backup is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
102 User’s Guide