Compuprint 4247-X03 - Manual (Page 119)

Rear Forms Backup
This parameter is displayed as long as the second (optional) tractor is installed and
applies to the paper loaded on the default (lower) tractor. The Rear Forms Backup
parameter instructs the printer whether it can perform tractor movements that
would back the forms up. Such movements include parking the printer. This
would be used when the physical characteristics of the forms currently loaded
make it undesirable for the printer to attempt to move the forms in the reverse
direction (for example, labels).
Even if Rear Forms Backup is disabled, the SCROLL/MICRO can still be used for
the paper path. You can define the rear forms backup to any one the following
values:
Enabled (Default)
Allows the printer to back up the rear forms as
needed.
Disabled Prevents the printer from backing up rear forms.
To change or check the Rear Forms Backup:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Setup
Rear Forms Backup
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
Forms Backup is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Chapter 8. Printer setup 103