Compuprint 4247-X03 - Manual (Page 19)

Unpacking the printer
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
1. Review the following list of contents as you unpack the shipping container.
Contact your point of purchase if any items are missing.
__ v Printer
__ v One forms tractor (and optional second tractor)
__ v Ribbon cartridge
__ v Documentation and CD
__ v Controller Board (do not remove from protective package)
__ v Operator panel overlay
__ v Power cable
__ v CD Rom
Additionally, you can order the following option (not pictured here).
v
Printer Stand - Provides adequate printer support, and especially helpful
when using the Dual Push forms path
2. After opening the shipping container, have another person help you remove the
printer and place it on a table or the optional printer stand. If you select a table
as the permanent location, ensure:
v You have access to both the front and the rear of the printer.
v The table you select is sturdy enough to support the weight of the printer,
and firm enough to contain the action of the printer movement. To meet this
criteria, We recommend the optional printer stand which is available from
your marketing representative.
Figure 2. Contents of Shipping Container
Chapter 1. Getting started 3