Comtech EF Data CRS-311 - Manual (Page 144)

CRS-311 1:1 Redundancy Switch Revision 7
Serial-based Remote Product Management MN/CRS311.IOM
6–14
Parameter Type
Command
(Code and
qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes:
i.e., ASCII codes between 48 and 57)
Response to Command
(Target-to-Controller)
Query
(Code and qualifier)
Response to query
(Target-to-Controller)
Time TIM= 6 bytes, numerical Command or Query.
The time from midnight, in the form hhmmss, where
hh = hours, between 00 and 23,
mm = minutes, between 00 and 59, and
ss = seconds, between 00 and 59
Example: TIM=231259 would be 23 hours, 12 minutes and 59
seconds from midnight.
TIM= (message OK)
TIM? (received OK, but
invalid arguments)
TIM* (message OK, but not
permitted in current mode) TIM? TIM=hhmmss
(see description of
arguments)
TMI/RMI types N/A 11 Bytes Query only.
x indicates the TMI/RMI type detected in each slot position:
Positions 1 through 10 are TMIs, where x may be:
0 = none present
1 = CRS-320 rev A
2 = CRS-330
3 = CRS-340 rev A
4 = CRS-340 rev B
5 = CRS-370
6 = CRS-320 rev C
7 = undefined
8 = CRS-341
9 = CRS-316
A = CRS-336
B = undefined
C = CRS-315
D = CRS-325
E = CRS-335
F = CRS-345
G = CRS-365
H = CRS-365D
Position11 is the RMI, where y may be:
0 = none present
7 = CRS-310
D = CRS-307
E = CRS-306
F = CRS-305
Example: XMI=20000000007 N/A XMI? XMI=xxxxxxxxxxy
(see description of
arguments)