Comtech EF Data CRS-311 - Manual (Page 194)

CRS-311 1:1 Redundancy Switch Revision 7
Appendix E MN/CRS311.IOM
E–4
Step Task
5
Connect the loose (unconnected) end of the
CA-0000089 Ribbon Cable to the P1 socket on the
CRS-515 TMI.
6
Install the CRS-515 TMI into its chassis slot. Engage the
TMI until it is properly seated in the receptacle on the
chassis’ backplane.
7
Securely hand-tighten the thumbscrews on both the
TMI and RMI.
The retrofit has been completed and the CRS‐311 1:1 Redundancy Switch is ready to be connected to the SLM‐5650/5650A modems per
Chapter 3. CABLES and CONNECTIONS, Sect. 3.3 SLM‐5650/5650A Modem Connections.