Hypertherm HD3070 Plasma Arc Cutting System w/ Automatic Gas Console - Manual (Page 200)

HD3070 with Automatic Gas Console Instruction Manual 5-75
16
MAINTENANCE
Tighten (Torque to
12-15 inch pounds)
Loosen
Install New Water Tube
Loosening and Tightening Water Tube
O-Ring
Water Tube
Gold Ring
(location in torch)
Nut Driver
(4.5 mm)
Water Tube
Figure 5-10 Water Tube Removal and Replacement
Be careful not to dislodge
gold ring when installing
water tube. See Caution
and step 3 on previous page.