Hypertherm HD3070 Plasma Arc Cutting System w/ Automatic Gas Console - Manual (Page 60)

3-12 HD3070 with Automatic Gas Console Instruction Manual
16
INSTALLATION
Installation
This section provides the user with the necessary information to install the HD3070 system. Installation of the
system should not be undertaken unless all of the pre-installation requirements presented in front of this section
have been completed. This section includes the following:
• Placing and mounting the system units.
• Interconnecting the units with the electrical control cables, cooling hoses and torch and gas lead sets.
• Mounting the PAC184 or PAC186 torch to the torch quick disconnect.
• Adding the torch coolant.
System Units Placement
Position the RHF console prior to making electrical and coolant connections. Also mount the torch quick disconnect
and off-valve assembly. Note that power supply (with the automatic gas console mounted on top of it) placement
information is presented in Pre-Installation in the front of this section.
Remote High Frequency Console
Place the RHF console in a convenient location to allow easy routing and connection leads, coolant hoses and
torch lead set. Bolt the unit to the mounting surface. See Figure 3-5.
Automatic Gas Console
To remove the automatic gas console from the power supply, refer to Figure 3-6. After removal, place the automatic
gas console in a convenient location to allow easy routing and connection of the gas hoses, control cables and gas
lead set.
Torch Quick Disconnect Assemblies/Off-Valve Assembly
The torch quick disconnect assemblies and off-valve assembly are shipped loose. The 45° quick disconnect,
generally used with the PAC184 torch, is normally mounted onto a robotic arm using the four 1/4-20 holes mounting
holes. See Figure 3-7 for torch quick disconnect mounting hole dimensions.
The straight quick disconnect assembly, generally used with the PAC186 torch, is normally mounted onto a torch
lifter on a x-y cutting table.
The off-valve assembly may be mounted up to a distance of four feet from either of the torch quick disconnects.