Yaesu FTM-10R - Manual (Page 102)

100 FTM-10R O
PERATING
M
ANUAL
Set Mode Item [F45 VOL.ITCOM F45 VOL.ITCOM F45 VOL.ITCOM F45 VOL.ITCOM F45 VOL.ITCOM]
Function: Sets the volume level of the intercom mode.
Available Values: IVOL HI/IVOL LOW
Default: IVOL HI
Set Mode Item [F46 VOX MIC F46 VOX MIC F46 VOX MIC F46 VOX MIC F46 VOX MIC]
Function: Enables/Disables VOX operation.
Available Values: VOX OFF/R-HAND/F-HAND/FRONT
Default: VOX OFF
VOX OFF
: Disable the VOX operation
R-HAND : Enable the VOX operation for the microphone, which is connected to the rear
panel MIC Jack.
F-HAND : Enable the VOX operation for the microphone, which is connected to the front
panel MIC Jack (requires optional “MEK-M10” Microphone Jack).
FRONT : Enable the VOX operation for the front panel microphone.
Set Mode Item [F47 VOX SENS F47 VOX SENS F47 VOX SENS F47 VOX SENS F47 VOX SENS]
Function: Sets the VOX sensitivity.
Available Values: MIN/1/2/3/4/5/6/7/8/MAX
Default: 5
Set Mode Item [F48 WIRES F48 WIRES F48 WIRES F48 WIRES F48 WIRES]
Function: Enable/Disable the Internet Connection feature.
Available Values: OFF/CODE/MEM
Default: OFF
Set Mode Item [F49 WX ALERT F49 WX ALERT F49 WX ALERT F49 WX ALERT F49 WX ALERT]
Function: Enables/Disables the Weather Alert Scan feature.
Available Values: OFF/ON
Default: OFF
M
ENU
(“S
ET
”) M
ODE