Ront, Anel – Yaesu FTM-10R User Manual

Page 6

Advertising
background image

4

FTM-10R O

PERATING

M

ANUAL

F

RONT

P

ANEL

& T

OP

P

ANEL

These keys select the following operations.
• AF Dual Feature (See page 25)

• Reverse (See page 29)

• ARTS Feature (See page 26)

• Scan Operation (See page 30)

• Display Dimmer (See page 27)

• Smart Search Operation (See page 30)

• Horn Alert Feature (See page 27)

• Squelch Threshold Level (See page 31)

• Intercom Operation (See page 28)

• TCALL (See page 30)

• Monitor Feature (See page 28)

• TX Power Level (See page 32)

• Public Address (See page 29)
• Volume Level Control while Intercom Operation (See page 32)

/

keys

Press this key to transmit.
Speak into the microphone while pressing this key.
P

Release this key to return to receive.

P

You may change this key function to “toggle”
mode (toggle the “transmit” and “receive” mode
each time the key is pressed). (See page 77)

PTT keys

The internal microphone is located
here. Speak into the grill in a normal
voice level while pressing the PTT key.

MIC

This indicator glows green when a signal is
received.
This indicator glows red during transmission.
This indicator blinks blue when a message is
received.
This indicator glows white when transmitting
a message.

TX/BUSY Indicator

You may adjust the receiver audio level with the DIAL knob after pressing this key.
P

The LED to the left of the DIAL knob will glow red when the DIAL knob is set to control
the receiver audio level.

P

Press this key again or wait for three seconds, to cancel control of the audio level by the
Dial knob.

Mute Function:
Press and hold this key for one second to temporarily mute the receiver audio.
Press this key again to restore the receiver audio.

VOL/SEL key

Advertising