Asic, Peration – Yaesu FTM-10R User Manual

Page 25

Advertising
background image

23

FTM-10R O

PERATING

M

ANUAL

B

ASIC

O

PERATION

3. Rotating the DIAL knob tunes the frequency in pre-programmed steps. Clockwise rota-

tion of the DIAL knob will increase the frequency; counter-clockwise rotation will lower
the operating frequency.

4. Press and hold in one of the front panel

/

keys for one second (the 1 MHz digit

will blink). Then rotate the DIAL knob to change the frequency at 1 MHz per step. This
feature is extremely useful for making rapid frequency excursions over the wide tuning
range of the FTM-10R.

5. Press the [VOL/SEL] key until the red LED to the left of the DIAL knob illuminates

and the volume level is displayed on the LCD. Now, the DIAL knob becomes the vol-
ume knob.

6. Rotate the DIAL knob to adjust the receiver volume. Clockwise rotation increases the

audio output level.

T

RANSMISSION

1. Press the front panel

/

keys to switch the operating band to 144 MHz or 430

MHz band.

2. Press the PTT (Push To Talk) key on the front panel when the frequency is clear. Speak

into the microphone on the front panel (upper left corner of the front panel) in a normal
voice level.
When talking around 3 feet away from the front panel microphone, the modulation may
not be enough and the transmitted audio level may be lower.

3. When your transmission is complete, release the PTT key. The transceiver will revert to

the receive mode.

PTT key

MIC

Advertising