Istening, External, Audio – Yaesu FTM-10R User Manual
Page 61: Input
59
FTM-10R O
PERATING
M
ANUAL
The FTM-10R enables you to output the audio signal from the external audio equipment
such as an iPod
®
to the speaker. You may operate on the amateur band while listening to
your favorite music.
1. Turn off the FTM-10R and external audio equipment.
2. Connect the external audio equipment to the LINE IN Jack on the rear panel of the
FTM-10R.
3. Turn on the FTM-10R by pressing and holding the [POWER] key for two seconds.
4. Press the front panel
/
key to select the “LINE-IN” band.
5. Turn on the external audio equipment.
P Press the [VOL/SEL] key to adjust the volume (AF level) of the audio output level.
While the RED LED is on, the volume level can be adjusted with the dial knob.
P
The volume level is displayed on the LCD.
P
Adjust the audio input level at the external audio equipment side.
P
You may monitor the amateur band and external audio signal at the same time when
you activate the Club Channel Monitor function.
P
You may enjoy stereo listening from external audio Input. Use the optional BH-1
Bluetooth Headset with the FEP-4 Ear Phone for BH-1 or an aftermarket stereo
speaker, and set the Menu Item “F42 STEREO”. See page 87 for detail.
When you have finished listening to the external audio, press front panel
/
key to
select another band.
L
ISTENING
TO
EXTERNAL
AUDIO
INPUT
Audio output “L”
Audio output “R”
GND