Yaesu FTM-10R - Manual (Page 9)

7 FTM-10R O
PERATING
M
ANUAL
R
EAR
P
ANEL
You may connect an optional MH-68
A6J
or MH-
68
B6J
Hand Microphone to this jack if you use.
MIC jack
This 3-contact 3.5-mm mini stereo-phone jack pro-
vides receiver audio output for an optional exter-
nal speaker. The audio impedance is 4 Ohms, and
the level varies according to the setting of the front
panel VOL control.
P
Inserting a plug into this jack disables audio from
the transceiver's internal speaker.
P When stereo speakers are connected to this jack,
and the Menu item “F42 STEREO” is set to “STE-
REO
”, you may enjoy FM Broadcast audio, or
the external audio from the LINE IN jack in ste-
reo.
P If there is no audio output from the external
speakers when connected to this jack, confirm
that the Menu item “F34 SPEAKER” is set to
“REAR” (See page 86).
P Use of a sound isolating headset while driving
on public roads is not lawful. An open type head-
set must be used for safety.
Hint: Menu Mode
The FTM-10R Smart Menu enables the configu-
ration of 49 transceiver parameters to your favorite
settings.
EXT SPK jack
Connect an external audio source (such as the iPod ® ) to this
jack using the after-market audio cable.
When using the audio line input to this jack, you may enable
the receiving of amateur signals while listening to your favor-
ite music.
Adjust the input level with the volume control of the external
audio equipment connected.
The connection cable depends on the external audio equipment
you connect. Please ask your dealer.
LINE IN jack