Yaesu FTM-10R - Manual (Page 33)

31 FTM-10R O
PERATING
M
ANUAL
S
MART
M
ENU
F
EATURES
6. To recall the Smart Search memories, just rotate the DIAL knob (or press the microphone’s
[UP]/[DWN] key) to choose from among the Smart Search memories.
7. Press the front panel key to return to VFO mode with the current frequency of the
Smart Search memory.
Note: 1) Smart Search is a great tool when visiting a city for the first time. You don’t
need to spend hours looking up repeater frequencies from a reference guidebook.
Just ask your FTM-10R where the action is!
2) The Smart Search memories are so-called “soft” memories. They will be lost if
you initiate a new Smart Search sweep of the band, or if you switch to the VFO or
Memory mode.
S
QUELCH
L
EVEL
A
DJUST
Adjust the squelch level to mute the noise from the speaker when no signal is being re-
ceived.
1. Press the top panel / key to select “SQL LEVL”.
The current squelch level will be displayed.
2. Press the key.
3. Rotate the DIAL knob just to the point where the noise is
silenced and the front panel green “BUSY BUSY BUSY BUSY BUSY ” indicator turns
off.
Available selections are:
Amateur Bands:
OFF MIN 01 ~ 06 MAX (Default: 01)
AM/FM Broadcast Bands:
OFF MIN 01 ~ 03 MAX (Default; AM: 01, FM: 02)
If the DIAL knob is set further clockwise, sensitivity to weak signals is reduced.
4. Press the key to save the new setting and return to the VFO or Memory Channel
mode.
When the
key function is set to “SQL LEVL” via the top panel / key, the
key may be used as the Squelch Level control key.
Number of Smart Search Memories.
<C> is the start frequency of the Smart Search.