Yaesu FTM-10R - Manual (Page 72)

70 FTM-10R O
PERATING
M
ANUAL
To accessing an FRG Node
1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F48 WIRES”.
3. Press the
key to enable selection of this Menu Item.
4. Rotate the DIAL knob until “MEM” appears on the display.
This activates WiRES TM in FRG mode. The “ ” icon will
appear on the display.
5. Press and hold the key for one second, then rotate the
DIAL knob to select the Internet Memory register number
(D1 ~ D9) corresponding to the Internet link repeater to
which you wish to establish an Internet link.
6. Press the [VOL/SEL] key to save the new setting and exit
to normal operation.
7. Once the Internet Connection feature is activated per step 4
above, you may now press the key, while you are transmitting, to send out the
selected DTMF string (to establish the link to the desired Internet-link node).
8. To disable the Internet Connection feature, repeat steps 1 - 4 above, selecting “OFF” in
step 4, then press the [VOL/SEL] key to save the new setting and exit to normal opera-
tion (the “ ” icon will disappear from the display).
I
NTERNET
C
ONNECTION
F
EATURE (WIRES
TM
)