Yaesu FTM-10R - Manual (Page 27)

25 FTM-10R O
PERATING
M
ANUAL
AF D
UAL
F
UNCTION
With the “AF DUAL” function, it is possible to monitor your desired amateur band fre-
quency while receiving AM, FM broadcast or Audio from the external input jack.
You may select: AM broadcast, FM broadcast, Club Channel or external line input, by
changing the Menu Item “F2 AF DUAL” (The factory default is AM broadcast receiving).
1. Set the FTM-10R to the desired amateur band frequency by the VFO or Memory chan-
nel selection.
2. Press the top panel / key to select “AF DUAL”.
3. Press the key to activate the AF Dual function.
P By first setting the desired VFO or memory channel in
step #1 above, and then starting “AF DUAL” function, both the amateur signals and
the AM broadcast station will be received.
4. Rotate the DIAL knob to select the desired AM Broadcast station.
P You may switch the AM Broadcast Band frequency control between the VFO and
Memory channel by pressing the key.
P When a signal is received in the amateur band, the AM Broadcast audio is muted.
When the amateur band signal drops, the AF Dual function is resumed (monitor the
amateur band frequency while receiving the AM broadcast).
P You may transmit on the frequency set in step1 by pressing the PTT key, even if the
AF Dual function is activated.
To disable the AF Dual function, press the front panel / keys.
P When the key function is set to “AF DUAL” via the
top panel / key, the key may be used to toggle
the “AF DUAL” on/off.
S
MART
M
ENU
F
EATURES