Mart, Eatures – Yaesu FTM-10R User Manual

Page 30

Advertising
background image

28

FTM-10R O

PERATING

M

ANUAL

I

NTERCOM

F

UNCTION

Intercom operation is possible with the FT-10R, by installing the optional Bluetooth

®

Adapter unit “BU-1” in the radio and using the optional Bluetooth

®

Headset “BH-1”. When

operating in a very noisy environment, (for example, a loud exhaust or engine noise, or
inside an off-road vehicle) communication with a fellow passenger is possible using the
Bluetooth

®

intercom feature.

1. Press the top panel

/

key to select “INTERCOM”.

2. Press the

key to activate the Intercom function.

When the Intercom function is activated, the volume level
graphic will be displayed on LCD.
You may switch the receiver audio volume level between “High” and “Low” via the
“VOL.ITCOM” function described below.
When the Intercom function is activated, the internal speakers (front panel and main
chassis) are disabled.

To disable the Intercom function, repeat steps 1 and 2 above.

When set the

key function to “INTERCOM” via the

top panel

/

key, the

key to be used as the Inter-

com feature on/off key.

Important Notice!

Use of a sound-isolating headset while driving on public roads is not lawful and haz-
ardous. An open type headset must be used for safety.

M

ONITOR

FEATURE

The Monitor permits disabling the noise and tone squelch systems temporarily.

When the received signal is weak and the sound from the speaker is intermittent, use this
function to over-ride the squelch and hear the received signal.

1. Press the top panel

/

key to select “MONI”.

2. Press the

key.

The noise and tone squelch are disabled while pressing the

key.

When the

key function is set to “MONI” via the top panel

/

key, the

key

may be used as the “Monitor” key.

S

MART

M

ENU

F

EATURES

Graphic Bar

Advertising