Yaesu FTM-10R - Manual (Page 91)

89 FTM-10R O
PERATING
M
ANUAL
M
ENU
(“S
ET
”) M
ODE
Menu Item
RPT SFT
RX EXP
RX F CCL
RX M MOD
SCN CVRG
SCN DRCT
SCN MODE
SCN STRT
SPEAKER
SQL BELL
SQL DCS
SQL EXP
SQL LEVL
SQL TSQF
SQL TYPE
STEP
STEREO
TOT
TX POWER
VOL.ITCOM
VOX MIC
VOX SENS
WIRES
WX ALERT
Function
Sets the magnitude of the repeater Shift.
Enables/Disables the band expansion.
Shifting of the CPU clock frequency.
Selects the receiving mode.
Selects the Scan range.
Select the Scan type.
Selects the Scan Resume mode.
Select the scan start direction which initiates the scanner using the
scan command by pressing the key.
Select the Speaker to be used.
Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables split CTCSS/DCS coding.
Set the squelch threshold level.
Setting of the CTCSS Tone Frequency.
Selects the Tone Encoder and/or Decoder mode.
Setting of the synthesizer steps.
Select the audio output.
Setting of the TOT time.
Selects the transmit power output level.
Sets the volume level of the intercom mode.
Enables/Disables VOX operation.
Sets the VOX sensitivity.
Enable/Disable the Internet Connection feature.
Enables/Disables the Weather Alert Scan feature.
Available Values
(Default: Bold Itaric)
0.00 ~ 99.95 MHz (Ú)
(50 kHz increments)
NORMAL/EXPAND
OFF/ON
AUTO/WIDE FM/FMNARR FM/
AM
IN BAND/HAM BAND
NORMAL/RETURN
BUSY/HOLD/TIME 3S/TIME
5S/TIME 10S
UP START/DN.START
REAR/F+R/FRONT/OFF
OFF/1T/3T/5T/8T/CONT
104 standard DCS codes (023)
OFF/ON
SQL OFF/SQL MIN/SQL 01 ~
SQL 06/ SQL MAX
Amateur Bands: SQL 01
AM: SQL 01, FM: SQL 02
50 CTCSS Tones (100 Hz)
OFF/TONE ENC/TONE SQL/
REV TONE/DCS
5.00/6.25/8.33/10.00/12.50/
15.00/20.00/25.00/50.00/
100.00/200.00 kHz, AUTO
STEREO/MONO
1MIN ~ 30MIN, OFF
LOW/MID/HIGH
IVOL HI/IVOL LOW
VOX OFF/R-HAND/F-HAND/
FRONT
MIN/1/2/3/4/5/6/7/8/MAX
OFF/CODE/MEM
OFF/ON
Ú Ú Ú Ú Ú : Depends on the band of operation.
Item
#
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49