Yaesu FTM-10R - Manual (Page 41)

39 FTM-10R O
PERATING
M
ANUAL
S
CAN
T
YPE
The FTM-10R has two methods of performing Memory Channel Scan; (1) All Memory
Channel Scanning and (2) Scanning only memory channels which are selected via the Skip/
Preferential memory setting (see next step).
1. Press the front panel key to switch the Memory mode, if needed.
2. Press and hold the key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M5 SCN TYPE.”
4. Press the
key briefly.
5. Rotate the DIAL knob to select desired Scan Type:
ALL MEM : The FTM-10R scans on all Memory Chan-
nels.
ONLY MEM : The FTM-10R scans only the memory chan-
nels that are appended with the “ONLY” flag
via the Skip/Preferential memory setting.
6. Press the [VOL/SEL] key to return to the memory recall
mode. The memory channel frequency will now be displayed.
S
KIP
/P
REFERENTIAL
S
CAN
S
ETTING
The FTM-10R allows you to set up a “Preferential Scan List”. You can “flag” channels
within the memory system. When you initiate the Preferential Memory Scan, only “flagged”
channels will be scanned.
1. Recall the memory channel that you wish to skip. (or Preferential Memory Channel).
2. Press and hold the
key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M6 SKIPONLY.”
4. Press the
key briefly.
5. Rotate the DIAL knob to select the desired Scan Type:
SKIP : This memory channel is skipped during memory
channel scans.
ONLY : This memory channel scans during preferential
memory scans.
OFF : This memory channel scans during memory chan-
nel scan.
6. Press the [VOL/SEL] key to return to the memory recall mode. The memory channel
frequency will now be displayed.
M
EMORY
O
PERATION