Yaesu FTM-10R - Manual (Page 26)

24 FTM-10R O
PERATING
M
ANUAL
Display Function
AF DUAL Press the key to activate the AF Dual function which enables receiv-
ing an Amateur Band signal while listening to the signal of an FM Broad-
cast Station at the same time.
ARTS Press the key to activate the ARTS feature.
DIMMER Press the key to enable adjustment of the display illumination level
by the DIAL knob.
HORN 1 Press the PTT switch to activate the sound of a Gong Bell.
HORN 2 Press the PTT switch to activate the sound of a UFO in flight.
HORN 3 Press the PTT switch to activate the sound of a klaxon.
HORN 4 Press the PTT switch to activate the sound of a siren.
INTERCOM Press the key to activate the Intercom mode.
MONI Press the key to disable noise and tone squelch.
PA Press the PTT switch to route your amplified voice through the PA
speaker.
REVERSE Press the key to activate the Reverse feature.
SCAN Press the key to activate the scanner.
SQL LEVL Press the key to enable adjustment of the noise squelch threshold
level by the DIAL knob.
SSCH Press the key to activate the Smart Search.
TCALL Press the key to activate the 1750 Hz Tone Burst.
TX POWER Press the key to change the transmit power level.
VOL.ITCOM Press the key to change the receiver audio level of the intercom
receiver.
Advice: When one of the above features does not appear in the list, it is because that feature
is not assigned to the top panel / keys. Please insure the Menu
“F14 FKEY MOD” is set to “FNC” or “FNC+MSG”.
S
MART
M
ENU
F
EATURES
The FTM-10R top panel / keys, and the key select and enable operation of the
following features:
Select the function [F] key