Ront, Anel – Yaesu FTM-10R User Manual

Page 7

Advertising
background image

5

FTM-10R O

PERATING

M

ANUAL

F

RONT

P

ANEL

& T

OP

P

ANEL

Press this key to activate the
function that is selected by the

/

keys.

key

Press and hold this key for two seconds to toggle the
transceiver’s power on or off.
Lock Function:
Press this key momentarily while the transceiver is
turned on to toggle the key lockout feature on or off.
P

You may also lock out the PTT key when the
LOCK mode is activated, by changing Menu Item
“F22 PTT LOCK”. See page 87.

POWER key

P

This key switches frequency control between the
VFO and Memory System.

P

In the VFO mode, press and hold this key for one
second to enter the Memory Write mode and then
press this key again to store the frequency into
the memory.

P

In the Memory mode, press and hold this key for
one second to enter the Memory Channel
Customization mode.

key

P

Selects the operating frequency and also selects
the memory channel.

P

Adjusts the receiver audio level when the LED to
the left of the DIAL knob glows red.

P

Select the Smart Menu Item and parameter when
the Smart Menu is activated.

DIAL knob

P

This LED glows red when adjusting the receiver audio level
with the DIAL knob.

P

This LED blinks orange when the Volume Setting Alert fea-
ture is active.

P

This LED blinks yellow when the Timer feature is active.

LED

P

Press these keys to switch the operating band as follows:

2 m Amateur Band

430 MHz Amateur Band

FM BC Band

AM BC Band

WX Band

Audio Line

Group Channel

2 m Amateur Band

P

Press and hold this key for one second (MHz digits will blink), then rotate the DIAL
knob to change the frequency in 1 MHz steps.

keys

Advertising