Visara SCON-20L Installation - Manual (Page 26)

3-8 707054-005
SCON-20L/22L/25L/28L/3074 Planning and Installation Guide
Special Considerations for StorageTek LMUs
There are two special requirements on the SCON-2XL when configuring for the
StorageTek LMUs.
• Enable the PC File Transfer option on the Device Profile used by the LMUs.
• Set the Coax Poll Rate to enhanced.
Enabling PC File Transfer for StorageTek LMU
Device Profile 00/Display LINCS C8.2 Central Control
Supervisor Authority: Disable Keyboard Tables: Host Language
Windowing: Disable PC File Transfer: Enable
Calculator: Disable SNA Data Display: After Chain
Typeahead: Disable HAP Session: Last
RPB Record Function: Disable HAP Status at IML: Enable
Display Host ID: Disable HAP Profile: __
Session Auto Swap: Disable Auto Coax Recovery: Disable
RESOURCE AUTHORIZATION MATRIX
0 1 2 3 Dynamic
Resource Definition 12345678901234567890123456789012 Access
------------------- -------------------------------- -------
3270 Host Class Access(01-32) 00000000000000000000000000000000 0
3270 Host Class Access(33-64) 00000000000000000000000000000000
ASCII Host Class Access 0000000000000000 0
IP Host Class Access 0000000000000000 0
LAT Host Class Access 0000000000000000 0
Printer Class Access 0000000000000000 0
Global Sequence Access 000000000000000000000000
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
The PC file transfer option is part of the Display Profile options.
The Coax Poll Rate option is found on the Coax Multiplexing menu.
Enabling Coax Poll Rate for StorageTek LMU
Coax Multiplexing LINCS C8.2 Central Control
Method of Connection on MCC1 Standard
MCC2 Standard
MCC3 Standard
MCC4 Standard
Dynamic Multiplexing Disable
Coax Poll Rate Enhanced
Automatic Coax Recovery Disable
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done