Visara SCON-20L Installation - Manual (Page 78)

6-6 707054-005
SCON-20L/22L/25L/28L/3074 Planning and Installation Guide
SAMPLE 5 - EMIF and ESCON Directors Used
LPAR390 TEST1
1F
EMIF
LPAR390B TEST2
EMIF
Switch 01
C4
43
LPARS on two different CPUs are connected through an ESCON director to a single
SCON over a single ESCON interface. Users on the SCON can have sessions on any or
all of the 4 LPARs shown.
First CPU Definitions:
CNTLUNIT CUNUMBR=1E00,PATH=1F,UNITADD=((00,5)),UNIT=3174,CUADD=0,LINK=C4
CNTLUNIT CUNUMBR=1F00,PATH=1F,UNITADD=((00,5)),UNIT=3174,CUADD=1,LINK=C4
RESOURCE PARTITION=((LPAR390,1),(TEST1,2))
CHPID PATH=(1F),PARTITION=((LPAR390,TEST1)),TYPE=CNC,SHARED
IODEVICE CUNUMBR=1E00,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(TEST1)
IODEVICE CUNUMBR=1F00,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(LPAR390)
Second CPU Definitions:
CNTLUNIT CUNUMBR=1195,PATH=43,UNITADD=((00,5)),UNIT=3174,CUADD=5,LINK=C4
CNTLUNIT CUNUMBR=2144,PATH=43,UNITADD=((00,5)),UNIT=3174,CUADD=6,LINK=C4
RESOURCE PARTITION=((LPAR390B,3),(TEST2,4))
CHPID PATH=(43),PARTITION=((LPAR390B,TEST2)),TYPE=CNC,SHARED
IODEVICE CUNUMBR=1195,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(TEST2)
IODEVICE CUNUMBR=2144,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(LPAR390B)
Notes:
1. Different CUADD values are required for each CNTLUNIT macro across both sets
of definitions since they will be sharing the same ESCON interface of the SCON,
unless Channel Path filtering is configured.
2. CUADD values do not have to be consecutive.