Visara SCON-20L Installation - Manual (Page 33)

707054-005 3-15
Chapter 3. Configuring the SCON
Line Options Panel - TCP/IP Options
Line Options/FET1 LINCS C8.2 Central Control
TCP/IP OPTIONS
IP Address: 207 015 182 037
Subnet Mask: 255 255 255 000
TELNET Host Connections: 000
TN3270 Client Connections: 0032
IP Router: Disable
BSD 4.2 IP Broadcast: Disable
Expanded IP Addressing: Disable
TCP Quiet Time (sec): 0000
Default Router Address: 207 015 182 001
DNS Primary Name Server: ___ ___ ___ ___
DNS Secondary Name Server: ___ ___ ___ ___
DNS/Ping Response Time: 0000
DNS Default Domain:
______________________________________________________________
SNMP Trap IP Address: ___ ___ ___ ___
SNMP Read Authentication String: ________________
SNMP Write Authentication String: ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
You must enable the maximum number of TN3270E client sessions that you will support
through the Ethernet interface on this panel. To support more than 32 of the TN3270E
sessions on the SCON-2XL models, you must have the appropriate Feature Activation
Disk(s) installed.
You also need to configure the IP address and subnet mask that will be used by the
SCON Ethernet card.
If the TN3270E clients will have to cross a router to get to the SCON, you will need to
configure this default router’s IP address.