Visara 5350 - Manual (Page 151)

Nov 06
35PPM Laser Printer User Guide 7-9
Job Accounting
Job Library Errors
When a Job Library error occurs, the following message will be displayed:
JOBLIB Error XX
Press Start
This is a continuable-fault, which means the START key must be pressed to allow operations to
continue. If the current job is aborted as a result of the error, the message"Canceling Job" may be
displayed after START is pressed. "XX" in the error display above is an error code. The error codes
for this message are:
■
01 – Data stream was missing a Job Name specification. (Job will be aborted.)
■
02 – Data stream was missing a User Name specification. (Job will be aborted.)
■
03 – Data stream was missing a PIN specification. (Job will be aborted.)
■
04 – Attempted to overwrite a PRIVATE job, but PIN did not match. (Job will be aborted.)
■
05 – Insufficient storage. (Job will be aborted only if it is a PRIVATE job.)
Job Accounting
The Job Accounting Menu provides access to functions and settings related to this feature. Use the
following procedure to enter the Job Accounting Menu to change the settings or access the func-
tions:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text Job Accounting Menu is shown on the second line
of the display.
3. Press the SELECT button to enter the Job Accounting Menu.
4. Press the NEXT button to move through the submenus: Enable, Print Info, Reset Info.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the Job Accounting settings.
SubMenu Default
Settings Available
Settings Procedure for Changing Setting
Enabled No Yes
No 1. Press NEXT or PREVIOUS to scroll through
Yes or No options.
2. Press SELECT to choose Yes to turn on this
function.
Print Info 1. Press SELECT to begin printing the Job
Accounting Summary Report.
Reset Info 1. Press SELECT to reset the Job Accounting
Information. This will delete all stored
information related to jobs received by the
printer.