About this chapter, Installing dram memory dimms, About this chapter 8-2 – Visara 5350 User Manual
Page 170: Installing dram memory dimms 8-2
Advertising
Nov 06
8-2
35PPM Laser Printer User Guide
Installing DRAM Memory DIMMS
About this Chapter
This chapter describes the procedures for installation of DRAM Memory DIMMs and the Hard
Disk Option. Also describes how to use the extended features associated with these options.
Installing DRAM Memory DIMMS
1.
Ensure that the printer power switch is set to the OFF <
O
> position.
2.
Disconnect the power cord from the wall outlet.
3.
Remove side cover from printer.
4.
Turn thumbscrews on controller assembly counterclockwise until loose and gently pull cover
towards you to remove from printer.
Advertising