Visara 5350 - Manual (Page 16)

Nov 06
1-2 35PPM Laser Printer User Guide
Installation Location
About this Chapter
This chapter reviews the contents of the printer packaging, explains the parts of the printer, and
describes the space and environment requirements of the printer.
Installation Location
In order to make use of the printer safely and comfortably, choose an installation location with the
following considerations.
Installation Environment
Suitable locations
■
Level and stable location (not tilted more than 5°)
■
Well-ventilated location
■
Temperature range: 10 to 32 °C; humidity range: 15 to 85% (no condensation) Humidity
should be 70% or below at 32 °C, and temperature should be 28 °C or below at
85% humidity.
NOTE: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room or
moving the printer from a location with low humidity/temperature to high humidity/
temperature can cause condensation inside the printer, directly interfering with image
transfer. When condensation occurs, leave the printer alone for at least 1 hour to acclimate
to the environment before using it.
Using a power outlet exclusively for the printer
Use one power outlet exclusively for this printer. If the printer draws power from the same circuit
as other large machines, such as copiers or air conditioners, the fluctuations in the current may
cause malfunctions or a loss of data. Also, electrical noise produced by machines located nearby
may interfere with the normal operation of the printer.
CAUTION: Place the machine on a level and sturdy surface that can withstand a weight of
20.6 kg. If tilted, the machine may fall over and cause injuries.
WARNING! Three power specifications are listed below. The specifications that apply to your
printer depend on its configuration. Connect the power plug only to a properly rated power out-
let. Otherwise, it can cause fire or electric shocks. If in doubt, contact our Printer Support Desk.
Rated voltage: 100 V
Rated frequency: 50/60 Hz
Rated voltage: 110 V
Rated frequency: 60 Hz
Rated voltage: 220 – 240 V
Rated frequency: 50/60 Hz